Welcome to
Sysmex Flow Cytometry Germany!

For ordering please make sure you are in your local shop.
If you are from Germany then please continue.
Otherwise please go to your country.

Go to my country Continue

Close filters
  •  
Select one or more
No results were found for the filter!
Count Check Beads green
Ready-to-use suspensions of 3.0 µm solid latex microspheres that can be excited by a green light source. These micro beads are recommended for quality control of absolute...
Sheath Fluid
Sheath Fluid is an aqueous solution ensuring that the sample introduced to the flow cytometer will run under hydrodynamic focusing. The principles of hydrodynamic focusing cause...
Cleaning Solution
Buffered detergent solution for cleaning the sample lines and cuvettes of Sysmex flow cytometry systems to reduce the accumulation of cellular debris and/or bubbles. Cleaning...
Decontamination Solution
Buffered decontamination solution for cleaning the sample lines and cuvettes of Sysmex flow cytometry systems to reduce proteins and cellular debris. Decontamination Solution...
Calibration Beads 3.0 µm, ready-to-use
Ready-to-use suspension of 3.0 µm solid latex microspheres that can be excited by a blue light source. This suspension serves as a reference standard for laser alignment and...
Sample tube for Sysmex flow cytometers
Transparent polypropylene (PP) tube, 3.5 mL, 55 x 12 mm, round base.
sterile single-pack CellTrics® filters (50/box)
CellTrics® are disposable filters for isolation of cells and nuclei from cell debris and aggregates. These sterile filters are single-packed and have tilted filters made from...
non-sterile CellTrics® filters (250/box)
CellTrics® are disposable filters for isolation of cells and nuclei from cell debris and aggregates. These non-sterile filters are bulk-packed and have tilted filters made from...
Hypochlorite Solution
Hypochlorite solution for cleaning the sample lines and cuvettes of Sysmex flow cytometry systems to reduce residuals and cellular debris. Documents. Refer to the instrument’s...
Caps for sample tubes
Push cap, for sample tubes with a diameter of 10 and 11 mm, LDPE, neutral.
Rack for sample tubes
Rack made of polycarbonate (PC), transparent, with 18 apertures in a grid. External dimensions (WxHxD): 70 x 40 x 137 mm, aperture Ø 12.8 mm for sample tubes.
Sample cup for Robby autoloader
Transparent polystyrene (PS) sample vial, 3.5 ml, 38 x 14 mm, conical base.
Need more information?
Need more information?
Service Hotline | Contact | Benefits
Service hotline
+49 (40) 534 10 2-0 Mon-Fri, 9 am - 5 pm

Contact
Use our contact form